Chuck Key Safety Switch Housing
SKU:
$9.95
$9.95
per item
Upgrade your lathe with a chuck key safety switch. This housing allows you to remove the chuck shield and repurpose the microswitch to only allow the lathe to run if the key is put back in the holder.
The housing is 3D printed in black ABS using a FFF (fused filament) printer. The part is built layer by layer; these layers are noticeable and some surface irregularities should be expected. Your purchase will include the housing and two set screws.
The housing is 3D printed in black ABS using a FFF (fused filament) printer. The part is built layer by layer; these layers are noticeable and some surface irregularities should be expected. Your purchase will include the housing and two set screws.
Download for free. Make wherever you like.
This file is provided for personal use only and cannot be modified or used for commercial purposes without express written consent from Phenom Engineering, LLC.
This file is provided for personal use only and cannot be modified or used for commercial purposes without express written consent from Phenom Engineering, LLC.
| housing_v3.stl |